C10CC

C10CC-00-ESC SENSORS

For a complete wiring diagram, refer to the Wiring Information.

Theory of Operation

- The ESC (Dynamics Sensor) is located inside the Occupant Restraint Controller (ORC). The sensor measure side-to-side (Lateral) motion and vehicle rotational sensing (how fast the vehicle is turning - Yaw). The sensors output is sent to the Antilock Brake System (ABS) in a Can Bus message.

- When Monitored:
The Occupant Restraint Controller (ORC) checks the ESC Sensor at power up during the initialization process, and continuously through the ignition cycle.

- Set Condition:
This DTC sets when the ORC detects a ESC Sensor internal conditions that latches the fault for the ignition cycle.





Diagnostic Test
VERIFY DIAGNOSTIC TROUBLE CODE (DTC) IS ACTIVE

NOTE: Make sure the battery voltage is between 10 and 16 volts before proceeding.

1. Turn the ignition on.
2. With the scan tool, read the active DTCs.

Does the scan tool display: C10C-49-ESC SENSOR INTERNAL ELECTRONIC FAILURE?

Yes

NOTE: For the C10C-49-ESC Sensor Internal Electronic Failure, use the C006A-54-Multi-Axis Acceleration Sensor-Missing Calibration.

- Perform the C006A-54-Multi-AXIS ACCELERATION SENSOR-MISSING CALIBRATION procedure Testing and Inspection

No

- Perform the RESTRAINTS SYSTEM INTERMITTENT TEST Restraints System Intermittent Condition Test.