Instrument Panel Center Bezel - Installation

INSTALLATION






1. Position the instrument panel center bezel (1) near the instrument panel and connect the wire harness connectors (4).

2. Install the instrument panel center bezel (1) onto the instrument panel and fully engage the retainer clips.





3. Install the shifter bezel to the floor console and fully engage the retainer clips.





4. Install the shifter bezel trim ring and fully engage the retainer clips.




Figure 4 - Center console equipped vehicles only.
5.

NOTE:
For vehicles not equipped with a center console, there are only 3 bezel fasteners.

Install the five instrument panel fasteners.













6. Install the power outlet trim bezel (1), to the center bezel (2), fully engaging the retainer clips.





7. Install the upper and lower center bezel tray liners (1).

8. Connect the negative battery cable.