Memory Seat Module (MSMD)

U0014-00-CAN INTERIOR BUS (+) CIRCUIT HIGH

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
Continuously when the ignition is on.

The battery voltage between 10 volts and 16 volts.

Body Control Module (BCM) is configured correctly.

- Set Condition:
A short to voltage is detected on the CAN Interior Bus (+) circuit.





Diagnostic Test
VERIFY DTC IS ACTIVE
1. Turn the ignition on.
2. With the scan tool, read active DTCs.

Is this DTC active?

Yes

- U0010 and perform the diagnostic test procedure for DTC U0010-00-CAN INTERIOR BUS.

No

- Manufacturer Code Charts and perform the Stored Lost Communication DTCs diagnostic procedure.