Body Control Module - Removal

REMOVAL

1. Disconnect and isolate the negative battery cable from the battery post/terminal.

2. Remove the remote park release access panel.

3. Remove the left sill and cowl panel. Cowl Trim Panel - Removal

4. Remove the park brake release rod at the park brake, remove lever and rod Removal

5. Disconnect the park brake switch harness connector.

6. Position the park brake assembly aside (3 nuts)

7. Disconnect the harness connectors (5) and retainers at the BCM (3).





8. Remove the 2 lower and 2 upper BCM bolts (3) to remove the BCM (3) from the bracket.