Crankshaft Main Bearing

NOTE:
Lubricate the bedplate retaining bolts with clean engine oil prior to installation.

NOTE:
Install the studs in locations three, five, and six.

Install the bedplate retaining bolts.

Tighten bolts to 3 Nm (26 in. lbs.) in the sequence shown.





Tighten bolts to 54 Nm (40 ft. lbs.) in the sequence shown.





Rotate bolts 90° in the sequence shown.





Tighten bolts to 23 Nm (20 ft. lbs.) in the sequence shown.