Front Fender - Installation

INSTALLATION






1. Position the fender (4) onto the hydroform fender supports (2).

2. Loosely install the bolts (1) and (3) for the right side.





3. Loosely install the support bolts (4).

4. Check and adjust the fender gap and flush.

5. Tighten all the bolts to 9 Nm (80 in. lbs.).





6. Install the bolt (1) and tighten to 9 Nm (80 in. lbs.).

7. Install the battery tray, if required Battery Tray - Installation.

8. Install the wheelhouse splash shield Splash Shield - Installation.

9. Install the front wheel opening molding.

10. Install the front fascia. Front Bumper Fascia - Installation

11. Install the headlamp unit. Front Lamp Unit - Installation





12. Install the antenna, if necessary. Antenna Mast - Installation