Cylinder Head Assembly: Specifications

INSPECTION

Inspect the cylinder head for out-of-flatness using a straightedge and a feeler gauge. If tolerances exceed 0.0508 mm (0.002 in.) replace the cylinder head.












Using the sequence shown, tighten the cylinder head bolts 1 through 10 to 34 Nm (25 ft. lbs.).

Using the sequence shown, tighten the cylinder head bolts 11 through 15 to 20 Nm (15 ft. lbs.).

Using the sequence shown, tighten the cylinder head bolts 1 through 10 to 54 Nm (40 ft. lbs.).

Using the sequence shown, tighten the cylinder head bolts 11 through 15 to 20 Nm (15 ft. lbs.).

Using the sequence shown, rotate the cylinder head bolts 1 through 10 90°.

Using the sequence shown, tighten the cylinder head bolts 11 through 15 to 34 Nm (25 ft. lbs.).

Intake Manifold
Specifications

Exhaust Manifold
Specifications

Camshaft Gear/Sprocket
Specifications