Underhood Lamp - Installation

LAMP






1. Position the underhood lamp and bracket (3) to the inner hood (1) reinforcement as a unit. Be certain that the locating tab (5) on the bracket is engaged into the locating hole in the inner hood reinforcement.

2. Install a new blind rivet to secure the underhood lamp mounting bracket to the inner hood reinforcement.

3. Reinstall the bulb into the underhood lamp. Underhood Lamp - Installation.

4. Reconnect the underhood jumper wire harness connector (2) to the underhood lamp connector receptacle.

5. Reinstall the removed push-in retainers that secure the hood silencer pad to the inner hood reinforcement.

6. Reconnect the battery negative cable.