B1EB6
B1EB6-LEFT SEAT RECLINER CALIBRATION INCOMPLETE
For a complete wiring diagram, refer to the Wiring Information.
- When Monitored:
Continuously.
- Set Condition:
The Folding Seat Module (FSM) will display this code if the recliner calibration needs to be performed.
Diagnostic Test
DTC ACTIVE
1. Turn the ignition on.
2. With the scan tool, read DTCs.
Does the scan tool display: B1EB6-LEFT SEAT RECLINER CALIBRATION INCOMPLETE as active?
Yes
NOTE: Ensure all four power 3rd row seat leg latches are latched prior to performing the recliner calibration routine.
Using the scan tool, perform the Folding Seat Module "Recliner End of Travel Calibration" routine. Upon completion erase the Folding Seat Module DTC's.
- Perform POWER FOLDING SEAT SYSTEM VERIFICATION TEST. Power Folding Seat System Verification Test.
No
- Erase the stored DTC.
- Perform POWER FOLDING SEAT SYSTEM VERIFICATION TEST. Power Folding Seat System Verification Test.