Liftgate
LIFTGATE
1. Check to be certain that the two plastic nuts (2) are in good condition and properly installed in the liftgate inner panel (1).
2. Position the Low Frequency (LF) antenna (4) to the liftgate inner panel.
3. Install and tighten the two screws (5) that secure the LF antenna to the liftgate. Tighten the screws securely.
4. Reconnect the liftgate wire harness connector (3) to the LF antenna connector receptacle.
5. Reinstall the trim panel onto the inside of the liftgate. Liftgate Trim Panel - Installation.
6. Reconnect the battery negative cable.