Programming and Relearning

UPDATE PRESSURE THRESHOLDS

NOTE:
The wiTECH software level must be at the latest release to perform this procedure.

NOTE:
The vehicle must be driven before the TPMS light will turn off.

CAUTION:
Read all notes and cautions for programming procedures.

NOTE:
Have the vehicle PIN readily available before running the routine

1. Connect a battery charger to the vehicle.

2. With the wiTECH diagnostic application, perform the following steps:

- Select "WIRELESS CONTROL MODULE (WCM)"

- Select the "MISCELLANEOUS FUNCTIONS" tab

- Highlight and select "UPDATE PRESSURE THRESHOLDS"

- Note On-Screen instructions and select the "NEXT" button

- Verify current settings, select the "NEXT" button to change settings

- Select "NEXT"

- Enter the PIN when prompted.

- Select "NEXT"

- Verify that the PIN number is correct

- Once verified, select "NEXT"

- Select "NEXT"

- Wait for the WCM to update it's configuration

- Once the WCM configuration is complete, select "NEXT"

- Note On-Screen instructions and select the "FINISH" button