Rear

REAR






1. Disconnect and isolate the battery negative cable.

2. Raise and support the vehicle.

3. Locate the rear axle sensor (1) on the underside of the lower C-pillar reinforcement outboard of the left lower control arm for the rear axle.

4. Disconnect the underbody wire harness connector from the connector receptacle for the rear axle sensor.

5. Carefully unsnap the lower end of the rear axle sensor link from the ball stud (2) on the outboard side of the left lower control arm for the rear axle.

6. Remove the screw (3) that secures the rear axle sensor mounting bracket to the lower C-pillar reinforcement.

7. Disengage the two tabs on the inboard side of the rear axle sensor mounting bracket from the two slots in the lower C-pillar reinforcement.

8. Remove the rear axle sensor, mounting bracket and link from the vehicle as a unit.