Operation CHARM: Car repair manuals for everyone.

Lumbar Control Switch - Installation






INSTALLATION

NOTE:
Take the proper precautions to protect the face of the seat cushion side shield from cosmetic damage while performing this procedure.

NOTE:
Driver side shown. Passenger side similar.





1. Position the lumbar control switch (1) to the seat cushion side shield (4) and align the switch to opening in the side shield.

2. Engage the four retaining tabs (2 and 5) that secure the lumbar control switch to the seat cushion side shield. Make sure the tabs are fully engaged.

3. Connect the wire harness connector (3).

4. Install the seat cushion side shield Seat Cushion Side Shields - Installation.

5. Reconnect the negative battery cable.

6. Verify proper power lumbar support operation.