Seat Belt Switch - Description

DESCRIPTION





The driver and passenger front seat belt switches for this vehicle are small, normally open, single pole, single throw, leaf contact, momentary switches. The seat belt switches are integral to each front seat belt buckle (1). The front seat belt buckles are located on a molded plastic scabbard (5) and a bracket (4) that are secured by a screw to a bracket near the back of the upper inboard front seat track so that the buckles travel with the seat.

The front seat belt switches are connected to the vehicle electrical system through a two-lead pigtail wire and connector (2) on the front seat belt buckle-half, which is connected to a wire harness connector and take out of the seat wire harness.

The seat belt switches cannot be adjusted or repaired. If ineffective or damaged, the entire front seat belt buckle-half unit must be replaced.