Adaptive Cruise Control (ACC)

P0585-00-SPEED CONTROL SWITCH 1/2 CORRELATION

For a complete wiring diagram, refer to the Wiring Information.

Theory of Operation

The Speed Control Switch is hardwired to the Steering Column Control Module (SCCM). The SCCM is located near the top of the steering column below the steering wheel. The SCCM includes the steering column shroud, the Steering Angle Sensor (SAS), the Clockspring, the Multifunction Switch, a Steering Column Power Tilt and Telescope Switch (if equipped), and a trim cover. The SCCM is replaced as an entire assembly.

- When Monitored:

Continuously with the ignition on.

- Set Condition:

The Steering Column Control Module (SCCM) has detected that a non-permissible combination has occurred in the Speed Control Switch.






1. VERIFY THE DIAGNOSTIC TROUBLE CODE (DTC) IS ACTIVE

1. Turn the ignition on.
2. With the scan tool, read DTCs.

Is this DTC active?

Yes

- Perform the P0585-00 Speed Control Switch 1/2 Correlation diagnostic procedure. Steering Control Module (SCM)

No

- Perform the Stored Lost Communication DTCs diagnostic procedure. Stored Lost Communication DTCs