Instrument Panel Glove Box Module - Installation

GLOVE BOX MODULE





1. Connect the wiring harness and position the glove box compartment (1) into the I/P.
2. Install the six screws to the glove box compartment (1). Tighten the screws to 30 in-lbs.
3. Install the two side screws (2) securing the glove box compartment (1) to the I/P. Tighten the screws to 30 in-lbs.
4. Close the glove box door (3).





5. Connect the LED harness (1) and install the right side instrument panel silencer (2).