Vehicle System Interface Module - Installation

INSTALLATION





1. Install the Vehicle System Interface Module (VSIM) onto the mounting bracket (4) by inserting the locating tab (2) and rotating the VSIM downward until the retaining clip (5) is securely snapped into place.
2. Position the module assembly on the console tray and install the screws (3) that secure the bracket to the tray.
3. Position the module and console tray assembly into the vehicle and connect the electrical connectors (1).





4. Position the console tray (1) over the console, and press down to engage the clips; securing the tray to the console.
5. Connect the negative battery cable.