Alignment Angles Check

1. Jounce vehicle front end several times to settle the suspension components.
2. Check alignment angles in the following sequence: Caster, Camber and Toe-Out.
3. If the alignment angles are within specifications proceed to TOE-OUT.
4. If caster, camber or toe-out are not within specified limits, it will be necessary to repair or replace the steering, suspension or body component causing the incorrect alignment.
5. Remove tool Dir.1067 and install steering bracket onto the steering gear rack assembly.
6. Center the steering wheel, if necessary. Refer to Steering and Suspension/Adjustments.
7. Remove vehicle from alignment rack.