U11B9

U11B9-LOST COMMUNICATION WITH RF HUB

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
With the ignition on.

Battery voltage between 10 and 16 volts.

Body Control Module (BCM) is configured correctly.

- Set Condition:
This module has not received a RF Hub CAN Bus message for approximately two to five seconds.





Diagnostic Test
VERIFY DTC IS ACTIVE

NOTE: Make sure the battery voltage is between 10 and 16 volts before proceeding.

1. With the scan tool, read active DTCs.

Is this DTC active?

Yes

- Perform the U11B9-00-Lost Communication with RF Hub diagnostic procedure.

No

- Stored Lost Communication DTCs and perform the Stored Lost Communication DTCs diagnostic procedure.