Instrument Panel Center Bezel - Removal

REMOVAL

Special Tools:










1. Disconnect the negative battery.
2. Remove the A/C control panel A/C And Heater Control - Removal.
3. Remove the two screws (1 and 3) that secure center trim bezel (2) to the instrument panel cover.





4. Open the glove box door, remove the center trim bezel retaining screw located on the upper right edge of the glove box cavity.
5. Using trim stick C-4755 or equivalent, disengage the retaining clips from the center trim bezel (1).
6. Disconnect the harness from the switch pod and remove the center trim bezel from the vehicle.