Outside Rearview Mirror Glass - Installation

INSTALLATION





1. Position the glass case (3) near the mirror assembly (2).

CAUTION: Make sure wires are not caught between the glass case and the motor.

2. If equipped, connect the heater wires (1) by pushing on the thumb tabs.





3. Align the mirror glass case slots (2) to the retaining tabs (1) located on the mirror motor assembly.





4. Once aligned, push the glass case (2) into the mirror assembly (1) to engage the retainers. Make sure all retainers are fully seated.

NOTE: An audible snap is normal.

5. Repeat steps for the opposite side.
6. Connect the negative battery cable.