Front

REMOVAL






NOTE: Before proceeding, Warning Brakes - Caution .

1. Using a brake pedal holding tool as shown, depress the brake pedal past its first 25 mm (1 inch) of travel and hold it in this position. This will isolate the master cylinder from the brake hydraulic system and will not allow the brake fluid to drain out of the master cylinder reservoir when the lines are opened.





2. Raise and support the vehicle Maintenance.
3. Remove the wheel mounting bolts (1), then the tire and wheel assembly.





4. Remove the banjo bolt (4) connecting the brake flex hose to the brake line connector.
5. Remove the clip and remove the brake hose (3) from the strut.
6. Remove brake hose connector (2) from brake caliper.





7. Remove the two brake caliper guide pin bolts (2).
8. Slide the disc brake caliper (3) from the disc brake adapter bracket and remove.