Vibration Damper - Installation

INSTALLATION





1. Align the locator pin on the crankshaft sprocket with the hole in the vibration damper (1). Install the vibration damper (1) with three bolts (2) tightened to 25 Nm (19 ft. lbs.).





2. Install the accessory drive belt (4) Serpentine Accessory Drive Belt - Installation.





3. Install the frame splash shield (3) with three screws (1).
4. Install two screws (2) to the front wheelhouse splash shield.
5. Install the right vertical brace (5) with two bolts (4) tightened to 45 Nm (33 ft. lbs.).





6. Install the right front wheel and tire assembly Tires And Wheels - Installation.

NOTE: The Cam/Crank Variation Relearn procedure must be performed using the scan tool anytime there has been a repair/replacement made to a powertrain system, for example: flywheel, valvetrain, camshaft and/or crankshaft sensors or components PCM/ECM Reprogramming .