Dome Lamp Bulb - Removal

BULB





1. Disconnect and isolate the battery negative cable.
2. Remove the dome lamp unit from the vehicle. Dome Lamp - Removal.
3. If equipped, disengage the Blue And Me microphone wiring (2) from the retainer on the dome lamp back cover (1).
4. Insert the tip of a small flat bladed screwdriver into the notch between the back cover and each side of the dome lamp unit housing, one side at a time.
5. Gently pry the back cover inward until it unsnaps from the housing.
6. Swing open the back cover to access to the dome lamp bulbs (3).
7. Firmly grasp and pull the bulb straight out of the bulb holders within the dome lamp housing.