License Plate Lamp - Installation

INSTALLATION





1. Position the license plate lamp (3) to the underside of the liftgate light bar and handle unit (1).
2. Reconnect the light bar wire harness connector to the connector receptacle on the top of the lamp housing.
3. Align the base of the lamp housing with the receptacle in the underside of the light bar.
4. Engage the fixed tab on the end of the lamp housing opposite the latch tab (2) into one end of the light bar receptacle.
5. Push the latch tab end of the lamp housing up into the light bar receptacle until the latch tab snaps into place.
6. Reconnect the battery negative cable.