Side Marker Lamp Bulb - Removal

BULB






NOTE: A side marker lamp is integral to the front fascia forward of each front wheel opening and to the rear fascia behind each rear wheel opening.

1. Disconnect and isolate the battery negative cable.
2. Remove enough of the fasteners that secure the front of the front wheel house splash shield to the front fascia, or the rear of the rear wheel house splash shield to the rear fascia to gain access to the back of the side marker lamp housing. Splash Shield - Removal.
3. Disconnect the wire harness connector (1) from the side marker lamp bulb socket.
4. Firmly grasp the bulb socket on the back of the lamp lens/housing and rotate it counterclockwise about 30 degrees to unlock it.
5. Pull the socket and bulb straight out from the keyed opening in the housing.
6. Pull the base of the bulb straight out of the socket.