Operation CHARM: Car repair manuals for everyone.

Fuel Tank Pressure Sensor - Removal





REMOVAL






NOTE: Left rear splash shield shown, right rear splash shield similar.

1. Disconnect and isolate the negative battery cable.
2. Remove the fuel filler cap to relieve tank pressure.
3. Raise and support the vehicle.
4. Remove the right rear wheel splash shield Splash Shield - Removal.





5. Disconnect the fuel tank pressure sensor electrical connector (1).





6. Carefully raise the retaining tab (2), rotate and remove the fuel tank pressure sensor (1) from the fuel tank vent tube.





7. The fuel tank pressure sensor seal (1) can be reused if not damaged.