B1006-00
B1006-00-INTERNAL ERROR - BLUETOOTH CHIPSET ERROR
For a complete wiring diagram, refer to the Wiring Information.
- When Monitored:
With the ignition on.
- Set Condition:
This DTC will set if the phone is not compatible with the Blue & Me(TM) system.
1. CHECK FOR AN INTERMITTENT CONDITION
1. Using the scan tool, record and erase the CTM DTCs.
2. Cycle the ignition switch from on to off, wait five seconds and then back to on.
3. Attempt to pair the phone in accordance with the owner's manual.
4. Using the scan tool, read the active CTM DTCs.
Does the scan tool display active: B1006-00-INTERNAL ERROR - BLUETOOTH CHIPSET ERROR?
Yes
- Go To 2
No
- Test complete, the condition or conditions that originally set this DTC are not present at this time. Using the wiring diagrams as a guide, check all related splices and connectors for signs of water intrusion, corrosion, pushed out or bent terminals and correct pin tension.
- Perform the BODY VERIFICATION TEST. Body Verification Test.
2. CHECK THE CELL PHONE COMPATIBILITY
1. Using a reference guide verify the phone is compatible with the system.
Does the phone appear as compatible on the reference list?
Yes
- Replace the Convergence Telematics Module. Convergence Telematics Module - Removal.
- Perform the BODY VERIFICATION TEST. Body Verification Test.
No
- Test complete, the cell phone is not currently compatible with the Blue & Me(TM) system.