C1212

C1212-55-VARIANT CODING - NOT CONFIGURED

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
Ignition on.

- Set Condition:
If the Anti-Lock Brake Module detects an invalid variant code.





PERFORM THE LONGITUDINAL G-SENSOR ROUTINE
1. Turn the ignition on.
2. With the scan tool, record and erase the DTCs

WARNING: To avoid possible serious or fatal injury, check brake capability is available before road testing.

3. With the scan tool, perform the "Longitudinal G-Sensor" routine and perform and the ABS VERIFICATION TEST. ABS Verification Test.

Was the routine successful?

Yes

- Test complete, the condition or conditions that originally set this DTC are not present at this time. Using the wiring diagrams as a guide, check all related splices and connectors for signs of water intrusion, corrosion, pushed out or bent terminals, and correct pin tension.

No

- Perform the "Longitudinal G-Sensor" routine again, if still unsuccessful.
- Replace the Anti-Lock Brake System (ABS) Module. Anti-Lock Brake System Module - Removal.
- Perform the ABS VERIFICATION TEST. ABS Verification Test.