U0140

U0140-LOST COMMUNICATION WITH BODY CONTROL MODULE

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
Continuously when the ignition is on.

The battery voltage between 10 and 16 Volts.

Body Control Module (BCM) is configured correctly.

- Set Condition:
Bus messages not received from the Body Control Module (BCM) for approximately two to five seconds.





VERIFY THE DIAGNOSTIC TROUBLE CODE (DTC) IS ACTIVE

NOTE: Make sure the battery is fully charged before proceeding.

1. Turn the ignition on.
2. With the scan tool, read the active DTCs.

Does the scan tool display: U0140-LOST COMMUNICATION WITH BODY CONTROL MODULE?

Yes

- Perform the NO RESPONSE FROM BCM (BODY CONTROL MODULE) diagnostic procedure No Response From BCM (Body Control Module).

No

- Perform the Stored Lost Communication DTCs diagnostic procedure Stored Lost Communication DTCs.