Front Door - Removal

REMOVAL





1. Disconnect the negative battery cable.
2. Remove the cowl/scuff panel, Cowl Trim Panel - Removal.
3. On the driver's side, remove the hood latch release handle.
4. Detach the retaining cover (1) from the cowl sheet metal.
5. Detach the wiring connector (2) from the cover (1) and disconnect the wiring harness connectors.





6. Open the door.
7. Remove the harness boot (1) at the body side.
8. Pull the wiring harness (2) from the bodyside opening (3).





9. Remove the fastener (2) securing the door's check strap to the body side.
10. Remove the fasteners (5) securing the door hinges (1 , 3) to the bodyside (4, 5).
11. With the help of an assistant, lift the door up and out to remove.