Overhead Console - Installation

INSTALLATION





1. Position the overhead console (4) near the mounting location on the headliner.
2. Connect the electrical connectors (2) to the overhead console connector receptacles as needed.
3. Align the snap clips (3) on the overhead console housing with their receptacles in the overhead console bracket (1).
4. Push upward firmly and evenly on the sides of the overhead console housing (4) over the snap clip locations until the snap clips are fully engaged.





5. Connect the electrical connectors to the lighting module (3) as needed.
6. Align the snap clips (2) on the OLM with their receptacles in the overhead console (1).
7. Push upward firmly and evenly on the OLM until the snap clips are fully engaged.
8. Connect the negative battery cable.