Full Open Retractable Roof Motor - Installation

INSTALLATION





1. Position the motor (3) accordingly.
2. Install the screws securing the motor. Tighten the screws securely.
3. Connect the electrical connector to the motor.





4. Position the cover plate (2) and install with four new rivets (1).





5. Position the rear shelf (2).
6. Install the push pin retainers (3) securing the rear shelf.
7. Align and position the bracket (1) onto the rear shelf.
8. Install the three fasteners securing the bracket (1) to the rear shelf (2). Tighten the bracket securely.





9. Install the rear wind deflector / windscreen (1) by aligning and pushing down.
10. Connect the negative battery cable.