Condensation Drain Tube - Removal

REMOVAL

WARNING: Disable the airbag system before attempting any steering wheel, steering column or instrument panel component diagnosis or service. Disconnect and isolate the negative battery (ground) cable, then wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to follow these instructions may result in accidental airbag deployment and possible serious or fatal injury.





1. Disconnect and isolate the negative battery cable.
2. Remove the right side shifter housing trim panel Instrument Panel Cover - Removal.
3. Disconnect the condensate drain tube (1) from the HVAC housing (3).
4. Removed the condensate drain tube from the floor panel (2).