Side Repeater Lamp - Installation

LAMP





1. Be certain that a rubber O-ring seal is properly installed and in good condition around the base of the bulb socket (2).
2. Align the socket and bulb with the keyed opening on the back of the repeater lamp lens/housing (3).
3. Insert the socket and bulb into the housing until the socket is firmly seated.
4. Rotate the socket clockwise about 30 degrees to lock it into place.
5. Position the repeater lamp to the fender (1) mounting hole.
6. Using hand pressure, press the lamp lens/housing into the fender mounting hole until it snaps into place.
7. Reconnect the battery negative cable.