Bodyside/Liftgate Modular Windows - Water Leaks

Article No. 86-23-13

LEAKS - WATER - BODYSIDE AND LIFTGATE MODULAR WINDOWS

LIGHT TRUCK 1986-87 AEROSTAR

Water leaks around the perimeter of modular windows can be corrected using (E69Z-19562-A) seal material and the following procedure.

Remove window module assembly and thoroughly clean window module and flange opening of old sealing material. Apply a continuous strip of 8x8 mm seal material to the back of the window module or the window opening flange.

NOTE: The start/stop joint of the seal should be at the bottom of the opening and overlap 25- 50 mm (6-12 inches). Removal and installation procedures should be followed as shown in 1986-87 Shop Manual procedures, Section 72-08.

PART NUMBER PART NAME CLASS

E69Z-19562-A Seal Assembly CG
(25 Ft. Rolls)


OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: 29726AA - Bodyside window.
TIME: 2.1 Hrs.
OPERATION: 42006A - Liftgate window.
TIME: 1.5 Hrs. DLR. CODING: Basic Part No. Q19562 or 7042084 as applicable - Code: 48