Tailgate Power Window Switch - Binds In UP Position

POWER WINDOW - TAILGATE SWITCH - Article No.
BINDS IN THE "UP" POSITION - 87-3-17
VEHICLES BUILT PRIOR TO 11/03/86

LIGHT TRUCK 1987 BRONCO

ISSUE: The tailgate power window switch may bind in the "UP" position causing the power window motor to cycle on and off. This may be caused by the tailgate power window switch finish panel mounting bosses being too short or damaged.

ACTION: To correct this, install a new design finish panel and tailgate power window switch using the following service procedure.

1. Remove the headlamp knob, wiper/wash knob and finish panel from instrument panel (snaps out).

2. Disconnect the connector from the tailgate power window switch and remove switch.

Figure 12:

3. If mounting bosses on finish panel are damaged, obtain a new tailgate power window switch and finish panel. If mounting bosses are not damaged, obtain a new tailgate power window switch only, Figure 12.

4. Install the new tailgate power window switch in the proper position on finish panel and check for a gap between the mounting bosses and the mounting "ears" on the switch. If no gap exists, install the (2) switch mounting screws and reinstall the finish panel.

5. If a gap exists between the mounting bosses and the tailgate power window switch, install a flat washer (44719-S8) between the mounting bosses and switch before installing the (2) attaching screws, Figure 12.

6. Check operation of the tailgate power window switch. Make sure system operates properly and binding is corrected.

PART NUMBER PART NAME CLASS

E7TZ-14529-B Switch - Tailgate B
E7TZ-98044D71-A Finish Panel - Black C
Finish Without Heated Backlite
E7TZ-98044D71-B Finish Panel - Black C
Finish With Heated Backlite
E7TZ-98044D71-C Finish Panel - Woodgrain C
Finish Without Heated Backlite
E7TZ-98044D71-D Finish Panel - Woodgrain C
Finish With Heated Backlite
44719-S8 Washer RS

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual
OPERATION: SP870317A
TIME: 0.6 Hr. DLR. CODING: Basic Part No. 14529 - Code: 41