Fast Idle Cam

Fig. 13 Fast idle cam adjustment. 1987 - 88 models w/electric choke:

1987 - 88 MODELS W/ELECTRIC CHOKE

1. Perform choke plate pulldown adjustment as previously described.
2. With choke cap still wrapped and with vacuum applied to diaphragm, cycle the throttle.
3. If fast idle screw rests on No. 2 step of fast idle cam, proceed to step 5.
4. Turn Allen head adjustment screw clockwise to position fast idle screw higher on No. 2 step or counterclockwise to position it lower, Fig. 13.
5. Remove temporary choke cap gasket, install original locking gasket, choke cap and choke cap retainer and secure with breakaway screws.