Interior Trim - Premature Wear

88ford04
^ TRIM - INTERIOR - DOOR PANELS - POOR APPEARANCE

^ TRIM - INTERIOR - FRONT AND REAR SEAT COVERS AND DOOR TRIM PANELS POOR APPEARANCE

^ SEATS - FRONT AND REAR - POOR APPEARANCE OF SEAT COVERS

Article No. 88-5-13

LIGHT TRUCK: 1987 F-SERIES, BRONCO

ISSUE: Poor appearance or premature wear of interior door trim panels and front and rear seat covers on F-Series and Bronco vehicles with XLT trim may be caused by the materials used to manufacture the panels and seat covers.
















ACTION: To correct this, install new design door trim panels and seat covers made of Camden cloth. The Camden cloth improves wear qualities. Refer to the trim panel and seat cover application charts on pages 34 through 36 of this TSB for the correct service part numbers.

NOTE: On vehicles built after 2/18/87, do not install new door trim panels if they have a plastic upper half with a 2" x 25" cloth applique.

1. Remove the right and left hand interior door trim panels. Refer to the 1987 Light Truck Shop Manual, Section 45-03-1 for detailed service information.

2. Obtain the new service replacement interior door trim panels.

3. Install the right and left hand interior door trim panels. Refer to the 1987 Light Truck Shop Manual, Volume A, Section 45-03-1, for detailed service information.

4. Remove the front seat back and seat cushion covers. Refer to the 1987 Light Truck Shop Manual, Volume A, Section 41-60-1, for detailed service information.

5. On Broncos and F-Series Super Cabs, remove the rear seat back and seat cushion covers. Refer to the 1987 Light Truck Shop Manual, Volume A, Section 41-60-1, for detailed service information.

6. Obtain the new service replacement seat covers.

7. On Broncos and F-Series Super Cabs, install the new rear seat back and seat cushion covers. Refer to the 1987 Light Truck Shop Manual, Volume A, Section 41-60-1, for detailed service information.







8. Install new front seat back and seat cushion covers. Refer to the 1987 Light Truck Shop Manual, Volume A, Section 41-60-1, for detailed service information.
OTHER APPLICABLE ARTICLES: Supersedes 87-15-7
WARRANTY STATUS: Eligible Under Basic Warranty Coverage
OPERATION: 880513A - F-Series with captain's chairs
TIME: 3.0 Hrs.

OPERATION: 880513B - F-Series with captain's chairs
TIME: 1.3 Hrs.

OPERATION: 880513C - F-Series with full width seat
TIME: 1.2 Hrs.

OPERATION: 880513D - Bronco
TIME: 4.2 Hrs.

OPERATION: 880513E - Replace trim panels
TIME: 0.5 Hr. - All

OPERATION: 880513E1 - Extra time to cut both speaker holes
TIME: 0.4 Hr. DLR. CODING: Basic Part No. 62900 - Seat covers 7023942 - Trim panel
Code: 85