Windshield Washer Reservoir - Mounting Bracket Rattles

87ford3

WINDSHIELD WASHER RESERVOIR - MOUNTING Article No.
BRACKET RATTLES 87-11-20

LIGHT TRUCK: 1987 F-SERIES, BRONCO


ISSUE: Rattles from the windshield washer reservoir mounting bracket may be caused by the mounting bracket flexing and contacting the left front inner fender. This condition may only exist when the windshield washer reservoir is full of fluid.

ACTION: To correct this, install a foam spacer on the windshield washer reservoir mounting bracket using the following service procedure.

1. Remove the windshield washer reservoir mounting bracket.

2. Clean and dry the windshield washer reservoir mounting bracket.

Figure 17 - Article 87-11-20:

3. Attach the foam spacer (E7TZ-17B643-A) to the windshield washer reservoir mounting bracket as shown in Figure 17.

4. Reinstall the windshield washer reservoir mounting bracket.

PART NUMBER PART NAME CLASS

E7TZ-17B643-A Foam Spacer CG

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual
OPERATION: SP871120A
TIME: 0.3 Hr.
DLR. CODING: Basic Part No. 17651 - Code: 56