Suspension: Description and Operation

Fig. 1 Front Suspension 4x2 Models. Bronco II And Explorer:

Fig. 2 Front Suspension 4x2 Models. Ranger:

4X2 MODELS

The twin I-beam suspension consists of coil springs, I-beam axle arms, radius arms, upper and lower ball joints, spindles, tie rods, shock absorbers and an optional stabilizer bar, Figs. 1 and 2.

Fig. 3 Front Suspension. All 4x4 Models:

4X4 MODELS

The independent front suspension used on four wheel drive models is comprised of a two-piece front driving axle assembly, two coil springs and two radius arms, Fig. 3. The front driving axle consists of two independent axle arm assemblies. One end of each axle arm assembly is mounted to the frame, with the opposite end supported by the coil spring and radius arm.