Shift Linkage: Adjustments
ADJUST1. From inside vehicle, place selector lever in Overdrive position, then hang an 8 pound weight on selector lever.
2. Raise and support vehicle.
3. From below vehicle, pull down look tab on shift cable and remove fitting from manual lever ball stud.
4. Position manual lever in Overdrive position by moving lever all the way rearward (counterclockwise), then forward three detents (clockwise).
5. Connect cable end fitting to manual lever, then push up on lock tab to lock cable in correctly adjusted position.
6. Remove weight from selector lever then check Park engagement.
7. Check control lever engagement in all detent positions with engine running to ensure correct detent transmission action.