Computers and Control Systems: Technical Service Bulletins

• Customer Interest
  • Engine - No Start Condition
  • Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up
    • Overview
    • Procedures, Warranty and Labor
    • Idle Speed Adjustment
    • Procedure # 1
    • Procedure # 2 Idle Air By-Pass Valve Cleaning Only
    • Warranty Coverage
    • Labor Standards Operations
    • Operation Description
  • Engine - Poor Performance
  • Engine - Stall During Initial Start Up After Long Soak
  • Engine - Surge On Light Acceleration/Idle Roll
  • A/T - E4OD Shift Concerns/DTC's Set
• By Symptom
  • Customer Interest
    • Engine - No Start Condition
    • Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up
      • Overview
      • Procedures, Warranty and Labor
      • Idle Speed Adjustment
      • Procedure # 1
      • Procedure # 2 Idle Air By-Pass Valve Cleaning Only
      • Warranty Coverage
      • Labor Standards Operations
      • Operation Description
    • Engine - Poor Performance
    • Engine - Stall During Initial Start Up After Long Soak
    • Engine - Surge On Light Acceleration/Idle Roll
    • A/T - E4OD Shift Concerns/DTC's Set
  • Driveability
    • Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up
      • Overview
      • Procedures, Warranty and Labor
      • Idle Speed Adjustment
      • Procedure # 1
      • Procedure # 2 Idle Air By-Pass Valve Cleaning Only
      • Warranty Coverage
      • Labor Standards Operations
      • Operation Description
    • Engine - Lack of Power/No Start Diagnosis
    • Engine - Poor Performance
    • Engine - Surge On Light Acceleration/Idle Roll
  • Erratic Shifting
    • A/T - E4OD Shift Concerns/DTC's Set
  • Hard Shifting
    • A/T - E4OD Shift Concerns/DTC's Set
  • Poor performance
    • Engine - Lack of Power/No Start Diagnosis
    • A/T - E4OD Shift Concerns/DTC's Set
  • Slipping
    • A/T - E4OD TCIL Flashing/DTC's 62/628/1728 Stored
  • Starting problems
    • Engine - No Start Condition
    • Engine - Stall During Initial Start Up After Long Soak
• All Technical Service Bulletins
  • Electrical/Electronic/Fuel Induction - Glossary
    • Overview
    • A
    • B
    • C
    • D
    • E
    • F
    • G
    • H
    • I
    • J
    • K
    • L
    • M
    • N
    • O
    • P
    • Q
    • R
    • S
    • T
    • U
    • V
    • W
    • X
    • Z
  • A/T - E4OD TCIL Flashing/DTC's 62/628/1728 Stored
  • Engine - No Start Condition
  • Vehicle - Welding Precautions
  • IDM and Spark Timing Diagnosis - Manual Revision
  • EEC IV - Revised Pinpoint Test Steps
  • Electronic Modules - Protection From Static Electricity
  • EEC IV - Quick Test Procedures/Charts Revision
  • EEC Connector - Color Code Changes
  • Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up
    • Overview
    • Procedures, Warranty and Labor
    • Idle Speed Adjustment
    • Procedure # 1
    • Procedure # 2 Idle Air By-Pass Valve Cleaning Only
    • Warranty Coverage
    • Labor Standards Operations
    • Operation Description
  • Engine - Lack of Power/No Start Diagnosis
  • Engine - Poor Performance
  • Body/Frame - Arc Welding Precautions
  • Engine - Stall During Initial Start Up After Long Soak
  • Engine - Surge On Light Acceleration/Idle Roll
  • EGO Sensors - Silicone Contamination
  • A/T - E4OD Shift Concerns/DTC's Set
  • A/T - E4OD New Design Transmission Range Sensor