Attachment III - Technical Information
Dual Tank Fuel Line AssemblyTechnical Instructions
Inspection/Replace Fuel Line Assembly
1. Be certain that there is fuel in each tank.
2. Start the engine and run for two minutes using aft-axle fuel tank.
3. Repeat using mid-ship fuel tank.
4. If the engine fails to continue running on either tank, replace fuel line assembly. (Reference Shop Manual, Section 24-50 for procedure)
5. CAUTION:
Be sure all fuel line routing clips on the new fuel line assembly are secure to the frame side rail and rear tank cross member.
6. Check entire fuel system for leaks.
7. Complete Form 1864 and release truck from delivery hold.