1997-98 F-150/250 LD 4X2 Front Bumper

1997-98 F-150/250 LD 4X2 FRONT BUMPER

1. Turn off air suspension it applicable.

2. Hoist vehicle until bumper is at working level.

3. Clean excessive dirt from inside and outside the bumper.

4. Remove the five (5) push pins to the radiator support.

5. Spray the edges of the air intake opening and the bumper cover retainer openings and drain holes with Super Seal Anti-Corrosion Compound.

6. Reinstall the push pins and remove the tape.

7. Lower vehicle and turn on air suspension if so equipped.

8. Clean off overspray as needed.