Diagnostic Procedure #2 - Alignment
Article No. 94-20-1310/15/94
DIAGNOSTIC PROCEDURE # 2 - ALIGNMENT
Wheel Alignment - Measure the front wheel alignment. For out-of-specification vehicles, align to the "1992-94 Preferred Light Truck Alignment Service Specifications" stated in this article.
NOTE:
DIAGNOSTIC PROCEDURE # 1 MUST BE PERFORMED BEFORE ALIGNMENT. TEST DRIVE VEHICLE AFTER ALIGNMENT IS PERFORMED.
^ Vehicles which exceed the maximum average caster value shown above may result in shimmy concerns.
^ Vehicles operated below the minimum average caster value shown may result in wander and poor steering returnability concerns. If appropriate, reset nominal LH/RH caster to the high end of the specification.