Engine - No Crank Condition

Article No.
92-20-10

09/23/92

^ NO CRANK - 4.9L - IGNITION SWITCH CONNECTOR LOOSE

^ WIRING - IGNITION SWITCH CONNECTOR LOOSE FROM WIRE TERMINAL - VEHICLES WITH 4.9L ENGINE

LIGHT TRUCK:
1992 ECONOLINE

ISSUE:
A no crank condition may occur because the yellow wire (circuit # 37) on the ignition switch connector becomes loose from the wire terminal in the 14A200 wire assembly. The open circuit prevents battery voltage from completing the connection to start the engine.

ACTION:
Install new beryllium wire terminals which are more secure under ignition switch wiring conditions.

Wire Harness Terminal Repair Kits (Supplier Part Number: NMSHA-OOLPXX), with beryllium terminals and crimping tool, are available from:

Augat Automotive Components Division

Attn: Sales Department

22800 Hall Road

Clinton Township, MI 48036

Telephone: (313) 466-1200

Price: $295.00

The kit consists of...

^ Two (2) 50-drawer metal cabinets

^ Six (6) each of the 96 different terminals, machine crimped with a 4" (102 mm) "pigtail" of 12 or 16 gauge wire

^ One (1) unique, high compression crimping tool (this tool makes sure of solid connections which will prevent moisture or contaminants from affecting the wire splice.)

Individual beryllium terminals also are available through the regular parts distribution system.





Part Number/Name Chart

OTHER APPLICABLE ARTICLES:
92-13-5

WARRANTY STATUS:
Eligible Under Bumper To Bumper Warranty Coverage

OPERATION DESCRIPTION TIME
922010A Replace Terminal 0.4 Hr.

DEALER CODING
BASIC PART NO. CONDITION CODE
14A200 57

OASIS CODES:
203200, 601300