Jammed Lap Belt Retractor, Two-Point Systems

If the lap belt retractor is jammed by allowing the belt to retract while twisted, webbing can be freed with this procedure.
1. Use both hands to tighten the webbing on the spool by pulling on the belt.
2. Push the webbing into the retractor until the belt is completely retracted. Repeat Step 1 if necessary.
3. Pull the belt out of the retractor as far as it will go and inspect the webbing for foreign material or twisting. Remove the foreign matter or untwist the belt and let the webbing retract.
4. Sit in the seat, pull out the lap belt, and buckle up. Do this about five times to make sure the belt retractor operates properly.