Computers and Control Systems: Technical Service Bulletins

• Customer Interest
  • A/T - Harsh Shifts/Trouble Code 62/TCIL Lamp Flashes
  • A/T - E4OD Harsh/Double Bump On Reverse Engagement
  • A/T - E4OD Shift Concerns/DTC's Set
• By Symptom
  • Customer Interest
    • A/T - Harsh Shifts/Trouble Code 62/TCIL Lamp Flashes
    • A/T - E4OD Harsh/Double Bump On Reverse Engagement
    • A/T - E4OD Shift Concerns/DTC's Set
  • Erratic Shifting
    • A/T - E4OD Shift Concerns/DTC's Set
  • False instrument warning light/gauges
    • A/T - Harsh Shifts/Trouble Code 62/TCIL Lamp Flashes
    • EEC IV - Self Test Codes and MIL Service Tips
      • Overview
      • Overview of Three Digit EEC-IV Self-Test Codes
      • 1) Technician Not Familiar With Self-Test Code Output
      • 2) Inadvertent Erasure of Continuous Memory Self-Test Codes
      • 3) Concern Setting Continious Memory Code Isn't Present
      • 4) Grounded STO/MIL Circuit
      • 5) Engine Running In Hlos
      • 6) Misinterpretation of MIL Bulb Check
      • 7) MIL Flashes During Self-Test
      • 8) Processor KAM Is Erased or Fails
      • 9) Damaged Star Tester
      • 10) KOEO Processor Ram Test Failed
      • 11) Intermittent VSS Fault Detected In Wiggle Mode
      • 12) IDM Pulswidth Not Recognized By Processor (EDIS Vehicles)
      • 13) Intermittent Ignition System Fault
      • 14) Intermittent Open STI Circuit
      • 15) Power Lost to EEC Processor
      • 16) Other Warning Lamps Mistaken For MIL
      • 17) Development Testing /Wrong Processor Released to Production
  • Hard Shifting
    • A/T - Harsh Shifts/Trouble Code 62/TCIL Lamp Flashes
    • A/T - E4OD Harsh/Double Bump On Reverse Engagement
    • A/T - E4OD Shift Concerns/DTC's Set
  • Poor performance
    • A/T - E4OD Shift Concerns/DTC's Set
  • Slipping
    • A/T - E4OD TCIL Flashing/DTC's 62/628/1728 Stored
• All Technical Service Bulletins
  • A/T - E4OD TCIL Flashing/DTC's 62/628/1728 Stored
  • A/T - Harsh Shifts/Trouble Code 62/TCIL Lamp Flashes
  • EEC IV - Self Test Codes and MIL Service Tips
    • Overview
    • Overview of Three Digit EEC-IV Self-Test Codes
    • 1) Technician Not Familiar With Self-Test Code Output
    • 2) Inadvertent Erasure of Continuous Memory Self-Test Codes
    • 3) Concern Setting Continious Memory Code Isn't Present
    • 4) Grounded STO/MIL Circuit
    • 5) Engine Running In Hlos
    • 6) Misinterpretation of MIL Bulb Check
    • 7) MIL Flashes During Self-Test
    • 8) Processor KAM Is Erased or Fails
    • 9) Damaged Star Tester
    • 10) KOEO Processor Ram Test Failed
    • 11) Intermittent VSS Fault Detected In Wiggle Mode
    • 12) IDM Pulswidth Not Recognized By Processor (EDIS Vehicles)
    • 13) Intermittent Ignition System Fault
    • 14) Intermittent Open STI Circuit
    • 15) Power Lost to EEC Processor
    • 16) Other Warning Lamps Mistaken For MIL
    • 17) Development Testing /Wrong Processor Released to Production
  • A/T - E4OD Harsh/Double Bump On Reverse Engagement
  • Heated Exhaust Gas Oxygen Sensor - Application Chart
  • A/T - E4OD Shift Concerns/DTC's Set
  • A/T - E4OD New Design Transmission Range Sensor