Power Locks: Description and Operation
OPERATIONLeft/Right Side Doors
The Power Door System is powered by Circuit Breaker 12 of the Interior Fuse Panel, which is hot at all times. The Driver and Passenger side Power Door Lock Switches are located on the arm rests of the respective doors.
When either Power Door Lock Switch is depressed to the "LOCK" position, current flows from Circuit Breaker 12 through the closed switch to the "LOCK" lead of all the Door Lock Motors. The "UNLOCK" lead of the actuator would normally be grounded.
When the Power Door Lock Switch is pressed to the "UNLOCK" position, current flows from Circuit Breaker 12 through the closed switch to the "UNLOCK" lead of the Door Lock Motors. The "LOCK" lead would then be grounded.
Sliding Door
The Sliding Door is controlled by the Memory Lock Module. With the Sliding Door closed, the "LOCK" and "UNLOCK" operation works the same as the other doors. When the Sliding Door is open, a memory circuit is activated when the Door Lock Switch is pressed. After the Sliding Door is closed, the memory will lock the door within one or two seconds.